Franke T 200 - 6 Routine Appliance Maintenance to be Performed by the User

17
11-03-2014 / LSC 044 / Rev. 00
6 ROUTINE APPLIANCE MAINTENANCE TO BE PERFORMED BY THE USER
Take note!
To grant the efficiency of the appliance and to maintain correct operation, it is necessary to follow the manufacturer’s instruc-
tions as to cleaning and regular maintenance.
Attention!
Cleaning and routine maintenance operations must be carried out by the user according to the manufacturer’s instructions
givenherebelow.Beforecarryingoutanykindofcleaningoperation,disconnecttheappliancefromtheelectricitymainsand
from the gas system (if fitted). Cleaning and routine maintenance operations must be carried out when the machine is cold and
using protective gloves to prevent abrasions.
DAILY AT THE END OF THE JOB
1) Replacing the water in the boiler.
After turning off the appliance, replace the water in the boiler as follows:
 •Placeacontainerthatcanwithstandhightemperaturesbelowthehotwaternozzle(14)topreventanyhotwaterspills.
•Keepopenthehotwatertap(4)untiltheboileriscompletelyempty;switchthemachineonagainandthecorrectwaterlevelfor
the boiler will automatically be restored.
2) Then clean the filter holders and the filters with the brush provided, making sure no dirt is left inside the filter holders and that all filter
holes are clean.
3) Clean the shower heads below the delivery groups with the brush.
4) Clean the drip tray (8) and the cup grid (7), using the standard detergents on sale, if necessary.