Franklin Electric SUBDRIVE UTILITY User Manual

Explains the meaning of DANGER, WARNING, CAUTION, NOTICE symbols.

Key safety steps before installation and operation.

Specific safety warnings and precautions for the SubDrive Utility.

Details the SubDrive Utility's purpose and capabilities.

Lists the main features and benefits of the drive.

Identifies available models and their part numbers.

Guidance for selecting the correct pump for the system.

Guidance for selecting a compatible generator.

Lists all items included with the SubDrive Utility.

Procedure for inspecting the drive upon arrival.

Steps to plan the system installation.

Diagram and steps for submersible pump systems.

Diagram and steps for surface boosting systems.

Diagram and steps for surface jet pump systems.

Recommendations for pressure tank and pipe sizing.

Guidelines for mounting location and environment.

Specific instructions for securely mounting the drive.

Recommendations for optimal wiring.

Guidance on routing power and control wires.

Requirements for protecting the branch circuit.

Table for selecting appropriate circuit protection and wire gauge.

Limits and recommendations for motor cable length.

Information on conduit types and where to use them.

Steps for safely connecting high voltage wiring.

Instructions for proper system grounding.

Details on connecting input power and motor leads.

How to connect pressure sensors and transducers.

Overview of DIP switch and parameter configurations.

Setting the motor overload protection limit.

Configuring the drive for sensor or transducer input.

How to set the desired system pressure.

Specific settings for pressure transducers.

Adjusting the drawdown feature for tank draw-off.

Tuning drive performance parameters.

Adjusting the drive's response to pressure changes.

Setting the lowest operational motor speed.

Calibrating underload detection sensitivity.

Enabling and configuring the steady flow feature.

Adjusting settings for different tank sizes and bump behavior.

Explains the drive's control functions and indicators.

Interpretation of the Power, Status, and Fault LEDs.

Real-time monitoring of system status.

Description of the drive's protective functions.

How the drive manages high temperatures.

Explanation of the soft-start feature for motor protection.

How the drive prevents motor overcurrent.

How the drive detects and responds to broken pipes.

Comprehensive guide to resolving issues.

Steps to download and view the system's fault log.

Detailed list and explanation of fault codes.

Steps to diagnose and resolve overheating faults.

Troubleshooting for internal drive errors.

Resolving faults caused by incorrect settings.

Troubleshooting faults related to broken pipes.

Steps to resolve transducer-related faults.

Troubleshooting based on observed system symptoms.

Diagnosing and resolving issues when no water is delivered.

Addressing problems with unstable system pressure.

Diagnosing why the pump fails to stop.

Resolving issues causing the drive to trip frequently.

Steps to diagnose and fix low system pressure.

Steps to diagnose and fix high system pressure.

Identifying the cause of unusual noises from the system.

Addressing issues caused by radio frequency interference.

Diagnosing and fixing intermittent pump or drive operation.

Routine tasks to keep the drive in optimal condition.

Instructions for replacing the drive's cooling fan.

How to clean or replace air intake screens.

Details on how to update the drive's firmware.

Steps to determine the currently installed firmware version.

Guide on how to perform a firmware update.

Detailed steps for carrying out the firmware update.

Key technical data for the SubDrive Utility.

List of compatible accessories and their part numbers.

Information on certifications and enclosure ratings.

General notes and additional information.

Details the limited warranty coverage and exclusions.