EasyManua.ls Logo

Franklin R910 - SIM Card Installation and Handling; Battery Management and Charging

Franklin R910
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字 7
Installing / removing a SIM Card
Follow these instructions to insert or remove a SIM card. Remember to power off your device before inserting
or removing a SIM card.
Note: Your device's SIM card is preinstalled. These instructions are for reference only.
1. Press and hold the Power key to turn off the device before inserting or removing the SIM card.
To be updated [Image]
2. Remove the battery cover.
To be updated [Image]
3. Open the SIM card cover.
To be updated [Image]
4. Insert the SIM card gently with gold IC chip facing downward
To be updated [Image]
5. Remove the SIM card by gently pressing down and sliding outwards.
To be updated [Image]
6. Close the SIM card cover and insert the battery.
To be updated [Image]
Align the contacts of the battery with the contacts in the device.
7. Attach the battery cover.
To be updated [Image]
Battery Use
The following topics explain how to insert and remove your device's battery.
Battery Cautions
Storage: Avoid storing or leaving the battery with no charge remaining. Saved information and settings
may become lost or changed, or battery may become unusable. Charge once every six months before
storing or leaving unused for a long period.

Related product manuals