Franklin R910 - Page 44

錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 41
 IP Address: IP address for Web User Interface.
 Subnet Mask: Subnet mask for the IP address.
 VPN passthrough: VPN passthrough must be enabled if you want to allow VPN tunnels to pass
through your device’s firewall.
 DHCP Server: Enable or disable DHCP Server function.
 DHCP IP Range: Allocate begin and end IP address for IP Range.
 DHCP Lease Time: Define how long the leased IP address will be expired. The new IP address
will be relocated after the IP address is expired.
 DNS manual mode: Turn DNS manual mode on or off.
 UPnP: Turn UPnP (Universal Plug n Play) mode on or off.
 NAT Timer: Set TCP NAT time.
2. Click Save Changes to save your settings.
Firewall
1. From the Web UI, click Settings > Advanced Router > Firewall. You may set up firewall rules to protect
your network from virus and malicious activity on the Internet.