FRC PumpBoss PBA100 - Preset Settings; High Idle Function

PBA100 Rev0305PreLim
20
PRELIMINARY DOCUMENT
FOR REFERENCE/REVIEW ONLY
WIRING
The following figures include the schematics, wiring diagrams, block diagrams,
and cables for the PumpBoss series governors.
Pressure Transducer
Figure 4. Pressure Transducer Wiring
Pressure Transducer
Cable from 12-Pin
Connector
Pressure
Transducer
Pressure Transducer
Cable 3-Pin Connector
Pin/Wire Description
A/Black Ground
B/Red Supply Voltage
C/White Signal
Pressure Transducre
(Top View)
Supply
Voltage
Signal
Output
Ground