FRC PumpBoss PBA100 - Programming; Enter Program Code

PBA100 Rev0305PreLim
22
PRELIMINARY DOCUMENT
FOR REFERENCE/REVIEW ONLY
12 Pin Connector/Cable
Pin Wire Color Description
1 Red + 5 VDC Pressure Transducer
2 Black Ground Pressure Transducer
3 White Signal Pressure Transducer
4 Blue Engine Oil Press. Sensor Signal
5 Orange Engine Temp. Sensor Signal
6 Brown Buzzer Ground (300mA)
7 Violet High Idle Active Input (+12 VDC)
8 White Check Engine LED Input
9 Black CAN J1939 (–)
10 Red CAN J1939 (+)
11 Green Transmission Temp. Sensor Signal
12 Yellow RPM Signal
Notes:
- Not all wires are used for all engines.
- For Ford 6.0L engines the yellow RPM signal wire, pin 12, should be connected to
the Clean Tachometer Output [green/white wire, circuit #76].
12-Pin
Deutsch
Connector
12-Pin Cable
Butt
Connectors
BLU
ORG
BRN
VIO
WHT
BLK
RED
GRN
YEL
1
1
1
1
1
12
12
12
12
12
Figure 6. 12-Pin Connector Wiring
To Pressure Transducer
Connectors and Cables
3-Wire Cable