FRC TankVision WLA200 - Typical System Configuration

WLA200 Rev140407
27
Typical System Conguration
Figure 11. Typical System Conguration
Primary
Display
Pressure Sensor
Power
Remote
Display
MaxVision
LED
Display
Cab
Miniature
Display
Warning
Buzzer
12 VDC
Power
Power
To Remote
Light Driver
Power
Note: An unlimited number of remote
displays can be connected. Any remote
display can become a primary by
disconnecting the sensor from the
primary and connecting it to the remote.
To Other
Miniature
Displays
Datalink Daisey
Chain To Other
Devices
Note: A white wire with a Deutsch contact
on one end (to plug into the standard harness
connector) and a butt connector on the other
(to connect to customer provided wire) is
available from FRC.
White Wire
FRC Datalink