To Next PageTo Next Page
Need help?Do you have a question about the FRC TankVisionPro WLA300 and is the answer not in the manual?
General| Brand | FRC |
|---|---|
| Model | TankVisionPro WLA300 |
| Category | Touch Panel |
| Language | English |
Provides a general overview and lists the key features of the Tank VisionPro indicator system.
Details technical specifications for display modules, sensors, vents, and other system components.
Explains the purpose and operation of key system components like MaxVision and Remote Light Driver.
Instructions for mounting and connecting the primary and miniature display modules.
Guidance on installing pressure sensors, tank vents, MaxVision displays, and remote light drivers.
Provides wiring diagrams and pinout information for various system components.
Describes how primary and remote displays indicate tank levels and system status.
Details Non-Linear, Linear, and Full Tank Correction calibration methods for accurate tank readings.
Instructions for using programming codes to set tank levels, warnings, and color patterns.
Configuration for display brightness and synchronization between primary and remote units.
Identifies system faults and warnings, providing probable causes and solutions.
Procedure for cleaning and inspecting the pressure/vacuum foam tank vent.
Lists of standard part numbers and descriptions for WLA300 and WLA400 series.
Essential safety guidelines and personal responsibilities for equipment users.
