FRC TankVisionPro WLA300 - Figure 10. Color Pattern Selection; Color Pattern Selection

To Next Page

To Previous Page

WLA300 Rev170606

Figure 10. Color Pattern Selection

COLOR PATTERN SELECTION

Code 11 Pattern 1 - One solid color. 4-green\3-blue\2-orange\1-red (Default)

Code 12 Pattern 2 - All red (same as WLA-2XX Series)

Code 13 Pattern 3 - Top 1/8 level is green and all others are red.

Code 14 Pattern 4 - Three colors: blue\orange\red.

Code 15 Pattern 5 - All green, and turns red when the WARNING is active

(when the tank level is at or below 25%, or 1/4 full).

Code 16 Pattern 6 - Four fixed colors for each 1/4 or 25% level:

green\blue\orange\red.

Wait 5 seconds.

Save the new setting by holding the magnet at C 2 for 5 seconds.

Pattern 1 Pattern 2 Pattern 3 Pattern 4 Pattern 5 Pattern 6

Note: The above is an example of a programmed LED Color Pattern.

Related product manuals