WLA300 Rev170606
36
Cab Miniature and MaxVision LED Displays
Note: A white wire with a Deutsch contact
on one end (to plug into the standard harness
connector) and a butt connector on the other
(to connect to customer provided wire) is
provided with the Cab Miniature Display.
Butt
Connectors
Cab Miniature
Display
Cab Miniature Display
Wiring
Wire Description
Red Power 9-30 VDC
Black Ground
White Display Signal
Figure 15. Cab Miniature and LED Display Wiring
White Wire
LED Display Wiring
Wire Description
Red Power 9-30 VDC
Black Ground
Yellow Datalink (+)
Green Datalink (–)
MaxVision LED Display
Wires can be routed
from top, middle, or
bottom feed through.
TankVisionPro
Pin
Yellow 7
Green 8
Power
Note: A terminating resistor kit is
included with the MaxVision
LED display.
Note: See Terminating Resistor Notes
for the MaxVision on page 15.
To Next Page
Loading...