FRC TankVisionPro WLA300 - Typical System Configuration WLA4 XX; Figure 18. Typical System Configuration WLA4 XXX

WLA300 Rev170606
39
Typical System Conguration WLA4XX
Figure 18. Typical System Conguration WLA4XXX
Note: Multiple number of remote displays
can be connected to the primary display. Any
remote display can become a primary by
disconnecting the sensor from the primary
and connecting it to the remote.
Note: See Pin Description/
Location on pages 32 and 34.
Primary
Display
Pressure Sensor
Remote
Display
MaxVision
LED
Display
Cab
Miniature
Display
Warning
Buzzer
Visual Warning
Indicator
Silence Button
12 or 24 VDC
9-30VDC
Power
Terminating
Resistor
To Remote
Light Driver
To Other
Miniature
Displays
Datalink Daisy
Chain To Other
Devices
FRC Datalink
To Valve
Controller
9-30VDC
9-30VDC
Terminating
Resistor
White
Wire
Pin 6
12 or
24 VDC
NOTE: For Valve
Controller Activation:
Max 150 mA
to ground supply to
activate the signal or an
external relay.