Always check for worn serrations on the clamp surfaces when
making saddle angle adjustments with a single-bolt saddle clamp.
Worn serrations can cause the saddle to move, leading to loss of
control and potential injury. Additionally, ensure that all fasteners are
tightened to the correct torque. Over-tightened bolts can stretch and
deform while loose bolts can lead to fatigue and potential failure,
both of which can result in loss of control and falling.
WARNING
Small adjustments to the saddle position can significantly impact
performance and comfort. Make one adjustment at a time to find
your best saddle position.
After any saddle adjustment, make sure the saddle adjusting
mechanism is properly seated and tightened before riding. A loose
saddle clamp or seat post clamp can cause damage to the seat post
and compromise stability. A correctly tightened saddle adjusting
mechanism should prevent any saddle movement in any direction.
Periodically check to ensure that it is properly tightened.
WARNING
It has been reported that using a saddle that is incorrectly adjusted
or does not properly support your perineal area can lead to potential
injuries to nerves, blood vessels, and even impotence. If you
experience pain, numbness, or any discomfort while riding, it is
important to listen to your body and stop riding.
WARNING
Your saddle plays a crucial role in providing comfort and support during
your rides. If you experience any issues with your current saddle, it is
recommended to consult with a professional bike mechanic or specialist to
find a saddle that suits your needs and provides proper support for your
perineal area.
Remember, your comfort and safety should always be a priority while riding.
If you have any concerns or experience discomfort, take the necessary steps
to address the issue and ensure a comfortable riding experience.
If your bike has a suspension seat post, be aware that it may require periodic
maintenance or servicing. Consult your dealer for recommended service
intervals specific to your suspension seat post.
C. HANDLEBAR HEIGHT AND ANGLE
Your bike may be equipped with either a "threadless" stem or a "quill"
stem. If you're unsure about the type of stem on your bike, it's best to
consult your dealer for clarification.
If your bike has a "threadless" stem, your dealer may be able to adjust the
handlebar height by moving height adjustment spacers. Alternatively,
you may need a stem of a different length or rise to achieve the desired
handlebar height. It is important to consult your dealer for assistance in
making these adjustments as it requires specialized knowledge.
Changing the stem or stem height on certain bicycles can impact the
tension of the front brake cable. This can result in the front brake becoming
locked or creating excess cable slack, rendering the front brake inoperable.
If the front brake pads move closer or farther away from the wheel rim
when adjusting the stem or stem height, it is crucial to have the brakes
correctly adjusted by a professional before riding the bicycle.
Your dealer can also assist in adjusting the angle of the handlebar or bar
end extensions to suit your preferences.
Changing the stem or stem height on certain bicycles can impact
the tension of the front brake cable. This can result in either the
front brake becoming locked or excessive slack in the cable,
rendering the front brake ineffective. If the front brake pads move
closer to or further away from the wheel rim when adjusting the
stem or stem height, it is crucial to properly adjust the brakes
before riding the bicycle. Additionally, your dealer has the ability to
alter the angle of the handlebar or bar end extensions.
WARNING
Always ensure that fasteners are tightened to the correct torque.
Over-tightened bolts can stretch and deform, while loose bolts can
move and cause fatigue. Either scenario can lead to the sudden
failure of the bolt, resulting in loss of control and potential falls.
WARNING
19 20
To Next Page
Loading...