EasyManua.ls Logo

freebeat MORPH - Electrical System

Default Icon
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A. BATTERY
Ensure the battery is fully charged and operating properly The battery must
be locked onto the frame battery mount properly before usage. Ensure the
battery charger is unplugged from the battery pack and put away before use.
B. DISPLAY FEATURES
The image shows the varous features andintormation displayed
on the Display.
The content includes:
Intelligent battery level display
Motor power indication
Assist level adjustment and indication
Speed display (including real-time speed, maximum speed,
average speed)
Mileage display (including single trip mileage and total mileage)
Assist pushing control and display
Riding time display
Backlight control and display
Error code display
USB connection indication
Multiple parameter settings (such as wheel diameter, speed limit,
startup password setting, indoor/outdoor mode setting, etc.)
Default parameter restore function
37 38
Button Definitions
The screen is equipped with buttons: power on/off, i button, plus
button, headlight button, and minus/assist button. In the following
explanations, the power on/off button will be referred to as
"ON/OFF", the i button as "i", the plus button as "+", and the
minus/assist button as "-"
Power On/Off
Long-press the "ON/OFF" button to turn on the instrument and
provide power to the controller. In the power-on state, long-pressing
the "ON/OFF" button will shut off the power to the electric bicycle. In
the power-off state, the instrument no longer uses battery power,
and the instrument's standby current is less than 5uA.
If the electric bicycle is not used for more than 5 minutes, the
instrument will automatically power off.
It is strongly advised that you carry a spare inner tube whenever you
ride your bike. Patching a tube should be considered an emergency
repair. If the patch is not applied correctly or if multiple patches are
used, there is a risk of tube failure. This can result in a loss of control
and potentially cause a fall. It is recommended to replace a patched
tube as soon as possible to ensure your safety.
WARNING
H. ELECTRICAL SYSTEM
USB icon
Headlight symbol
Speed digital reading
Maximum speed
Average speed
Push assistance mode
Trip distance, ODO
Numerical information area
Error symbol
Bluetooth
Speed Unit
Battery SOC
Economy mode
Normal mode
Sport modes
Assist level
Trip time, Power, Menu
Unit