USER
MAINTENANCE
INSTRUCTIONS
Technological advancements have made bicycles and their
components more complex, and the pace of innovation is
increasing. This manual may not provide all the necessary
information for proper repair and maintenance of your bicycle.
To minimize the risks of accidents and potential injuries, it is
crucial that any repair or maintenance not specifically described
in this manual be performed by your dealer. Additionally,
individual maintenance requirements can vary based on factors
such as riding style and geographic location. Consult your dealer
to determine your specific maintenance needs.
WARNING
Many bicycle service and repair tasks require specialized
knowledge and tools. Do not attempt any adjustments or services
on your bicycle until you have learned from your dealer how to
properly carry them out. We strongly recommend that significant
mechanical repairs be done by a qualified bicycle mechanic.
Improper adjustment or service can result in damage to the
bicycle or accidents that may cause serious injury or even death.
WARNING
If you are interested in learning how to perform major service and repair
work on your bike:
1. Ask your dealer for copies of the manufacturer's installation and service
instructions for the components on your bike, or contact the
component manufacturers directly.
2. Ask your dealer to recommend a book on bicycle repair.
3. Inquire with your dealer about the availability of bicycle repair courses
in your area.
We recommend that you ask your dealer to check your work and the
quality of your maintenance before riding the bike for the first time. This
will ensure that everything is done correctly, and if any adjustments or
corrections are needed, it can save you time and the need for a mechanic.
Please note that there may be a modest charge for this service.
We also recommend consulting your dealer for guidance on purchasing
appropriate spare parts, such as inner tubes or light bulbs, once you have
acquired the skills to replace these parts when necessary.
SERVICE
Before performing any bike maintenance or cleaning, remove the
battery from the bike.
Please note that the bike is not approved for steam cleaning or
high-pressure water hose cleaning. Clean the bike using a moist rag.
Regular maintenance is recommended to be carried out once a year
or every 800 miles, whichever comes first.
Do not attempt to open or tamper with any part of the electrical
system of the bike. There is a risk of injury and permanent damage
to the bike. Always use Velotric genuine spare parts, if needed. When
disassembling and reassembling the wheels, tighten the front wheel
with 30Nm of torque and the rear wheel with 40Nm. Brake pads
and tires are consumable parts that should be replaced in a timely
manner. Use size 26-inch tires.
BICYCLE CARE
55 56
To Next Page
Loading...