Freestyle Precision Neo User Manual

Blood Glucose and Ketone Monitoring System
FreeStyle Precision Neo Pharmacy Guide
Time Setup
Press to turn on meter.
Press and hold the time on the
screen until the screen changes.
Set Time Format (12 hr or 24 hr clock)
Press or to change.
Press to continue.
Note: System time and date are
preset. Users or HCPs may need to
update settings to correct the hour.
Note: There is no “AM”
in the 12 hour format.
Set Minutes
The minutes blink.
Press or to set the minutes.
Press to continue.
Set Hour
The hour blinks.
Press or to set the hour.
Press to continue.
Meter date and time set up is quick and easy.
IMPORTANT: Only health care professionals can set up and change the insulin calculator settings.
Refer to package insert/label accompanied with your product for detailed instructions and indications for use.
FreeStyle and related brand marks are trademarks of Abbott Diabetes Care Inc. in various jurisdictions.

Freestyle Precision Neo Specifications

General

Test Time	5 seconds
Operating Temperature	10 °C to 40 °C (50 °F to 104 °F)
Operating Humidity	10% to 90% RH
Dimensions	97 x 47 x 15 mm
Weight	Approximately 40 grams
Sample Size	0.6 µL
Battery Life	1000 tests
Blood Sample Size	0.6 µL
Memory	Up to 1000 results
Battery	2 AAA batteries
Measurement Range	20 to 500 mg/dL
Operating Conditions	10% to 90% RH
Battery Type	Two CR2032 lithium batteries

Summary

Time Setup

Turn On Meter

Press the power button to activate the meter.

Access Time Settings

Press and hold the time on the screen to access settings.

Set Time Format

Choose between 12-hour or 24-hour clock display.

Set Hour and Minutes

Adjust hour and minute values using the arrow buttons.

Date Setup

Set Month and Day

Adjust month and day values using the arrow buttons.

Set Year

Adjust the year value using the arrow buttons and save.

Enabling Insulin Logging

Turn On Meter for Logging

Press the meter to turn it on to begin the process.

Enable Insulin Logging Feature

Hold the Home screen button until the icon appears to enable logging.

Logging an Insulin Dose

Initiate Dose Logging

Press the button to start the process of logging an insulin dose.

Select Insulin Type

Choose between long-acting or meal insulin for logging.

Enter Dose Amount

Use arrow buttons to input the actual insulin dose amount.

Confirm Dose Logging

Press to log the dose; press again to un-log.

Blood Glucose Trend Indicators

Low Glucose Indicator

A blinking down arrow appears after two low readings in 3 hours over 5 days.

High Glucose Indicator

A blinking up arrow appears after three high readings in 3 hours over 5 days.