Need help?Do you have a question about the Freestyle Lite and is the answer not in the manual?
General| Sample Size | 0.3 µL |
|---|---|
| Test Time | 5 seconds |
| Coding | No coding required |
| Operating Temperature | 10°C to 40°C (50°F to 104°F) |
| Battery | One 3-volt lithium battery (DL2032 or CR2032) |
| Measurement Range | 1.1 to 27.8 mmol/L |
| Memory | 400 results with date and time |
| Operating Humidity | 10% to 90% RH |
| Storage Conditions | Store between -20°C to 60°C |
Identifies and describes key parts of the FreeStyle Lite meter including screens, buttons, and ports.
Defines the purpose and scope of the blood glucose monitoring system.
Highlights critical safety advice and cautions for system use.
Explains the objective of meter setup and the first configuration steps.
Guides on adjusting the meter's audible alerts for different sound levels.
Instructions for configuring the meter's clock and date.
How to choose between Year/Month/Day or Year/Day/Month formats.
Completing the meter setup process and saving settings.
How to turn on the display and test strip port lights for better visibility.
Steps for test preparation and safety warnings, including hypoglycemia.
Guidelines for test strips and step-by-step test execution.
How to interpret test results and understand meter error messages.
Explains the meaning of blood glucose readings in mg/dL.
Explains results below 60 or above 240 mg/dL and actions.
Details the 'LO' and 'HI' display meanings and required actions.
Explains 'Er1' and 'Er2' codes and their solutions for meter issues.
Explains 'Er3' and 'Er4' codes and their solutions for procedural errors.
Fixes for issues preventing the meter from starting test mode.
Solutions for when the test does not start after applying blood.
Explains control test purpose, usage, and storage guidelines.
What to do for out-of-range results and how to perform a control test.
Verifying the screen and applying control solution correctly.
How to compare results and mark them as control tests.
How to access and review 7-, 14-, and 30-day averages.
How to scroll through and view stored test results with date and time.
Explains the function of setting up reminder alarms for testing.
Guides on configuring up to four reminder alarms on the meter.
Instructions on connecting the meter to a computer for data transfer.
Step-by-step guide to replace the meter's CR2032 lithium battery.
Explains why regular cleaning and disinfection are crucial for hygiene.
Detailed steps for cleaning and disinfecting the meter and lancing device.
Specific instructions for physically removing dirt and debris.
Specific instructions for killing pathogens on meter and device surfaces.
Details the meter's assay method and battery performance specifications.
Information on calibration, hematocrit range, and operating temperatures.
Specifies operating temperature range and power source details.
Details sample volume requirement and meter physical dimensions.
Explains the meaning of various symbols used in the manual and on the device.
To Next Page
