Freestyle Lite - Using Meter Lights; Activating Meter Lights

Warning: Drying agents in the test strip vial may be harmful if inhaled or
swallowed and may irritate skin and eyes.
English
English
Contact Customer Care Toll Free at 1-888-522-5226 www.MyFreeStyle.com
11
IMPORTANT:
2. Wash your hands and the test site with warm water and soap to ensure
accurate results.
• Thoroughly dry your hands and the test site.
• Do not use lotion or cream on the test site.
3. Check test strip expiration date.
Do not use expired test strips; they may produce inaccurate results.
IMPORTANT: Use only FreeStyle Lite® test strips. Other test strips can
produce inaccurate results. The test strips are for single use only.
ART22813-003_rev-A.indd 11-12
Important Test Strip Information
Please read the FreeStyle Lite® test strip package insert for more information.
• Use the test strips within the meter’s operating range: 40° – 104° F (4° – 40° C).
• Store test strips in a cool, dry place between 40° – 86° F (4° – 30° C).
• Store test strips away from direct sunlight and heat.
• Store test strips in their original vial only.
• Clean and dry your hands before removing a strip from the vial.
• Close the vial cap tightly immediately after removing a test strip.
• Do not transfer test strips to another container.
• Do not store test strips outside the vial.
• Do not bend, cut, or alter test strips.
• Do not apply blood to both sides of the test strip.
• Do not press the test strip against the test site.
• Do not scrape the blood onto the test strip.
• Do not apply blood to the at side of the test strip.
• Do not apply blood to the test strip when the test strip is out of the meter.
• Do not put blood or foreign objects into the meter.
11/9/16 1:28 PM
12