Freestyle Lite - Viewing Blood Glucose Averages in Memory; Viewing Test Results in Memory; Purpose; Using Your Meter Memory

on the display indicates that you are viewing stored test results.
shows the average value of glucose readings from the last 7-, 14-, or 30-days.
on the display indicates that the test result occurred when it was too hot or too cold
to use the meter and may not be accurate. This result is included in 7-, 14-, and 30-day
averages.
a test result of under 20 mg/dL is included in memory as LO.
a test result of over 500 mg/dL is included in memory as HI.
indicates a control solution test result.
English
English
Contact Customer Care Toll Free at 1-888-522-5226 www.MyFreeStyle.com
Using Your Meter Memory
Viewing Test Results in Memory
Meter memory stores the last 400 test results with time and date. Press
c
to scroll through the
Purpose
results. The most recent result appears rst.
The purpose of this section is to review your stored test results and 7-, 14-, and 30-day averages.
Viewing Blood Glucose Averages in Memory
Start with the meter o (no test strip inserted). Press
m
. Your 7-day average
appears (control solution, LO, and HI readings not included).
Note: To exit meter memory at any time, press and hold
m
.
Example:
Memory Display
your average
n= number of results included in your average
• Press
c
to scroll through 14- and 30-day averages and all stored test
results. The most recent result appears rst.
• Press
m
to scroll backward.
29
30
ART22813-003_rev-A.indd 29-30 1:29 PM11/9/16