88–01 Hood Rear Support
Lubrication
1. Apply the parking brakes and chock the tires.
2. Open the hood.
3. Clean both the hood- and cab-mounted hood
rear support components with a soapy water so-
lution.
4. Cover all contact surfaces of the hood rear sup-
port brackets and isolators with an approved
multi-purpose, lithium-complex, soap-based
grease; see
Table 1.
Approved Suppliers of Multi-Purpose Lithium Grease
Supplier Grease
Chevron Delo Heavy Duty EP
Exxon Unirex EP2
Mobil Mobil Grease XHP 222
Shell Retinax LC Grease
Texaco Starplex 2
Table 1, Approved Suppliers of Multi-Purpose Lithium
Grease
Hood, Grille, and Cab Fenders 88
108SD and 114SD Maintenance Manual, April 2011 88/1
To Next Page
Loading...
