Maintenance Operation Sets for Groups 00 through 83
Maint.
No.
Operation Description
Service Schedules
I, II, and III
Service Schedule
IV
IM M1 M2 M3 IM M1 M2 M3
33–07 Basic Inspection, Meritor Unitized Wheel Ends
†
•• ••
33–08 End-Play Check, Meritor Unitized Wheel Ends
‡
•• ••
33–09 Kingpin Lubrication, Detroit
™
Axles
§
•• ••
33–10 Tie Rod Lubrication, Detroit
™
Axles
§
•• ••
33–11 Steer Axle Hub Cap Vent Plug Inspection • • • • • •
35–01 Axle Lubricant and Filter Change, and Magnetic Strainer Cleaning • •
35–02 Axle Breather and Axle Lubricant Level Inspection • • • •
40–01 Wheel Nut and Rim Nut Check • • • • • •
40–02 Tire Check •••• ••••
41–01 Driveline Inspection •••• ••
41–02 Driveline Lubrication •••• ••
42–01 Air Brake System Valve Inspection • • • •
42–02 Air Dryer Desiccant Replacement • •
42–03 Air Dryer Inspection • • • •
42–04 Alcohol Evaporator Cleaning and Inspection • • • •
42–05 Dana Spicer Camshaft Bracket Lubrication ••••
42–06 Dana Spicer, Haldex, and Gunite Slack Adjuster Lubrication ••••
42–07 Meritor Camshaft Bracket Lubrication •••• ••••
42–08 Meritor Slack Adjuster Lubrication • •
42–09 Bendix E–6 Foot Control Valve Inspection and Lubrication • •
42–10 Brake Inspection •••• ••••
42–11 Versajust Slack Adjuster Inspection and Lubrication
¶
•••
46–01 Drag Link Inspection • • • •
46–02 Power Steering Fluid and Filter Change • •
46–03 Power Steering Fluid Level Inspection • • • •
46–04 Power Steering Gear Lubrication • • • •
46–05 Drag Link Lubrication • • • •
46–06 Rack and Pinion Steering Gear Inspection • • • •
46–07 Bellows Replacement, Rack and Pinion Steering Gear • •
47–01 Fuel Filter Replacement • • • •
47–02 Fuel Separator Sight Bowl Cleaning and Element Replacement • • • •
47–03 Fuel Tank Band-Nut Tightening • •
49–01 Exhaust System Inspection (noise emission control) •••• ••••
49–02 CAT CGI Bellows Replacement • •
General Information00
Maintenance Operation Sets Table: 00–09
Century Class Trucks Maintenance Manual, August 201700/18
To Next Page
Loading...
