What to do if the Fresenius Medical Care Medical Equipment chair does not correctly respond to hand controls?
If the chair isn't responding correctly to the hand controls, it may need recalibration. Please refer to section 3.3.3 for instructions.
How to operate the lift column on Fresenius Medical Care Medical Equipment?
To operate the lift column, which is mounted on top of the base, depress the hand control button for the chair height control. This should cause the chair to raise or lower.
How to operate the backrest motor on Fresenius Medical Care Medical Equipment?
To operate the backrest motor, which is mounted behind the backrest, depress the hand control button for the backrest. The backrest should then raise or lower.
How to operate the leg rest motor on Fresenius Medical Care Medical Equipment?
To operate the leg rest motor, which is vertically mounted under the seat, depress the hand control button for the leg rest. The leg rest should then raise or lower.
How to fix the leg rest motor on Fresenius Medical Care Indoor Furnishing?
If the leg rest motor (vertically mounted under the seat) of your Fresenius Medical Care Indoor Furnishing is not working, depress the hand control button for the leg rest. This should raise or lower the leg rest.
How to troubleshoot the backrest motor on Fresenius Medical Care Indoor Furnishing?
If the backrest motor (mounted behind the backrest) of your Fresenius Medical Care Indoor Furnishing is not working, depress the hand control button for the backrest. This should raise or lower the backrest.
How to adjust the lift column on Fresenius Medical Care Indoor Furnishing?
If the lift column (mounted on top of the base) of your Fresenius Medical Care Indoor Furnishing is not working, depress the hand control button for the chair height control. This should raise or lower the chair.
What to do if I lose feedback from actuators on Fresenius Medical Care Indoor Furnishing?
If you experience a loss of feedback from any of the actuators in your Fresenius Medical Care Indoor Furnishing T688 Series Chair, recalibrate the chair using the nurse's hand control as described.
What to do if I lose feedback from actuators in T688B Treatment Chair Fresenius Medical Care Indoor Furnishing?
If you experience a loss of feedback from any of the actuators in your Fresenius Medical Care Indoor Furnishing T688B Treatment Chair, recalibrate the chair using the nurse's hand control as described.
What if Fresenius Medical Care Indoor Furnishing chair doesn't respond to Process 1?
If your Fresenius Medical Care Indoor Furnishing chair does not respond to Process 1, follow the instructions for Process 2.
General| Brand | Fresenius Medical Care |
|---|---|
| Model | T688 Series |
| Category | Medical Equipment |
| Language | English |
To Next Page
