Fridgemaster MC55264A - Page 11

washer
Note:washermaysticktolowerdoor
11
14.Upturnthemiddlehingepartthe
direction180degree,transferitandadjust
itsposition,makethemiddlehingeaxis
intotheupperholeofthelowerdoor,tight
thebolts.
16. Transfertheupperhingepartand
maketheupperhingeaxisintotheupper
holeoftheupperdoor,andadjustthe
positionoftheupperdoor(pleasesupport
theupperdoorwithyourhandwhendoing
it),fixingtheupperhingepartwiththe
specialflangeself-tappingscrews.
12.Replacethelowerhingeparttotheleft
sideandfixingitwiththespecialflange
self-tappingscrews.Replacethefrontfeet
fixedboardtoanothersideandfixingit
withthespecialflangeself-tapping
screws.Installtheadjustablebottomfeet
parts.
Lowerhingepart(left)
frontfeetfixedboard
13.Transferthelowerdoortotheproperty
position,adjustthelowerhingepart,make
thehingeaxisintothelowerholeofthe
lowerdoor,thentightthebolts.
11.Unscrewthebottomhingeaxisand
removeittotheholewhichissidebyside
andscrewit.
15. Transfertheupperdoortothe
appropriateposition.Securethedoor’s
level,makethemiddlehingeaxisintothe
lowerholeoftheupperdoor.
middlehingepart
selftappingscrews
upperhingepart
17.Installthescrewholecoveronthetop
rightcorneroftherefrigerator.Installthe
upperhingecover(whichisintheplastic
bag)ontheleftcorner.Puttheother
upperhingecoverintothe plasticbag.