8
Installing your new appliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement.
Moving the refrigerator
sideways may damage your floor and the
rollers.
Ventilation of appliance
Install the appliance in
a plane
and stable surface.
Assure
good ventilation.
W
e recommend letting a space at least:
-
50-70mm from the back to the wall
-
100mm from the top to th
e wall
-
100mm from its side to th
e wall
Enough sp
ace must be provi
d
ed i
n
the
front of the appliance to allow the doors to
open as shown in follow diagrams.
Note:
yThe appliance is designed for a certain
climate class. Depending on the climate
class, the appliance can be operated at
the following ambient temperatures.
The climate class is specified on the
rating plate.
y
Stand your appliance in a dry place to
avoid high moisture.
y
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
Leveling of appliance
yFor sufficient leveling and air circulating
in the lower rear section of the appliance,
1498
1020
319 343
836
To Next Page
Loading...
