16
Display Controls(Only for some products)
Use your appliance according to the following control regulations, your appliance has the
corresponding functions and modes as the control panels showed in the pictures
below.When the appliance is powered on for the first time, the backlighting of the icons on
display panel will be illuminated for 3 seconds, then the display panel starts working . If no
buttons have been pressed and the fridge door has no open/close motion, the
backlighting will turn off after 1minutes.
Controlling the temperature
W
e recommend that when you star your
refrigerator for the first time, the
temperature for the refrigerator is set to
4°C, and the freezer to -18°C. If you want
to change the temperature, follow the
instructions below.
Caution! When you set a temperature,
you set an average temperature for the
whole refrigerator cabinet. Temperatures
inside each compartment may vary from
the temperature values displayed on the
panel, depending on how much food you
store and where you place them. Ambient
temperature may also affect the actual
temperature inside the appliance.
1. Freezer
Press the middle part of button to
set the freezer temperature between
-16°C and -24°C to suit your desired
temperature, and the freezer temperature
indicator will display corresponding value
according to the following sequence.
2. Fridge
Press the middle part of button to
set your desired fridge temperature
between 8°C and 2°C, and the fridge
temperature indicator will display
corresponding value according to the
following sequence.
3. Super Freeze
Super Freeze can rapidly lower
frozen temperature and freeze you
To Next Page
Loading...
