Friedrich EMWRT2 - Mounting the thermostat to the wall

PTAC Vert-I-Pak
Wireless Control Card-Typical Placement Location
10
Mounting the thermostat to the wall
➤ Remove the thermostat cover;
➤ Use the supplied wall anchors and mounting screws to secure the
thermostat to the wall;
➤ Insert two (2) A-Cell batteries (not-supplied) into the thermostat battery
compartment;
➤ Follow the “Thermostat Conguration” instructions;
➤ Replace the thermostat cover and screw in the locking screw;
Thermostat Installation