12 13
MENU
MENU
Control Panel Operation
The TM Menu continued
Auto mode selected. See Figure 18.
Set the cool setpoint for your rst timer period using the arrow buttons.
The cooling mode timer only sets the cool setpoint. See Figure 19.
Next, set the heat setpoint for your rst timer period. The heating mode
timer only sets the heat setpoint. See Figure 20.
Figure 18
MENU
Figure 19
MENU
Figure 20
Figure 21
Note: The auto mode timer sets both the cool and heat setpoint.
Set the time to start the rst timer period. See Figure 21.
To Next Page
Loading...
