Friendly Robotics RL500 - Whats in the Box

1. Standard Charger
Used for recharging the Robomower
3 . Pegs
2. RoboRuler
Used for setting the distance of the
perimeter wire from the lawn edge.
4.
Used for securing the perimeter wire to
the ground around the lawn perimeter
5.
Wire
Used to create a virtual wall for your
Robomower
6
.
Perimeter Switch & C-Cell Batteries
Activates the perimeter wire, which
defines the area in which the
Robomower will operate.
7
.
Perimeter Switch Mounting Stake
Used for supporting the perimeter
switch in the lawn.
8
.
Wire Connectors
Used for splicing wires (as needed).
Plot Connectors
Used for connecting the completed
NOTE: Installation tools needed, but not
included: hammer, wire cutters, small flat-
head screwdriver.
Robomower
What's in the Box
Power Pack
1.
2.
3.
4.
5.
6.
7.
8.
FUSE
Power Pack Fuse
(Must insert to operate)
Owner/Operator
FriendlyRobotics
Operator/Owner Manual
power pack.
and around obstacles.
perimeter wire installation to the
perimeter switch.
Manual
Robomower
Rl500/RL800
Whats In The Box
Page 7