NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side cabinets.
3.24" (61 cm) minimum clearance
between the cooktop and the bottom 21%"i_' _:
of the cabinet when the bottom of 55..25 cm) _ _-_
wood or metal cabinet is protected _ f "C
by not less than ¼" (0.64 cm) flame __,_.
retardant millboard covered with not ___
less than No. 28 MSG sheet metal, Figure 1 __
0.015 ,,(0.4 mm) stainless steel, ,, _
0.024 (0.6 mm) aluminum, or 0.020 _
(0.5 mm)copper. _ _ A
/
30 (76.2 cm) minimum Door Open |
clearance when the cabinet is (see note 5)
unprotected. .
4. For cutouts beow 22 7/8"(58 1 _ t f
cm), appliance will slightly show _%"
• t / _j#
out of the cab,net. .. j ........... .:,__
5. Allow at least 19 ¼" (48.9 cm) _<_ ............
clearance for door depth when _ "-,,.
.t ,s open. _B "_"_'/
Side )anel
*IMPORTANT: To avoid cooktop cooktop (or glass) breakage for cutout width (E
dimension) of more than 30V_6" (76.4 cm), make sure the appliance is centered in the
counter opening while pushing into it. Raise leveling legs at maximum position, insert
the appliance in the counter and then level. Make sure the unit is supported by
the leveling legs not by the cooktop (or glass) itself.
22 7/8" (58.1 cm) min.
23 1/4" (59.05 cm) max.
,÷ (see Note 4) -_
1 1/8"
(2.86 cm)
FRONT
OF _ FRef_
CABINET
35 5/8" (90.5 cm) -
36 5/8" (93cm)
30" (76,2 cm) 31Y2" (80 cm) 28 5/16" (71,9 cm) 30_+1/16" (76,2_+0,15 cm) 21 3/4" (55,2 cm) Min.
22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
backguard
36 5/8" (93 cm) Max.
35 5/8" (90.5 cm) Min.
To Next Page
Loading...
