Frigidaire FAS157P1A1 - Complete the installation

Window installation
/
9. Complete the installation
A. Cut the foam to fit the opening between the
top of the inside and outside window.
See (Fig. 13).
B. Some installations may require additional
sealing around the window and air conditioner.
Check for any air leaks and seal where
necessary.
C. For 25K and 28K models, the condensed
water will maybe overflow the unit in highly
humid areas. You may wish to install the drain
plug underneath the base and attach a drain
hose (not included) to the plug.
See (Fig. 14).
Foam
Fig. 13
-_/F/
J/
_- Drain Plug
.......... _Drain Hose
(not included)
Fig. 14
--7--