Manual operation (without remote control)
Manual operation can be used
temporarily in case you can not find
the remote controller or its batteries
are exhausted.
1. Open and lift the front panel up to
an angle until it remains fixed with
a clicking sound.
2. One press of the manual control
button wilt lead to the forced AUTO
operation.
3. Close the panel firmly to its
original position.
Attention
Once you press the manual button, the
operation mode is shifted in an order
as: AUTOand OFF.
The manual operation is mainly usedfor
testingpurpose. Do not choose it unless
it is necessary.To return to the remote
controller operation, usethe remote
controller
Manual control
button
Auto/OFF ®
To Next Page
Loading...
