ENGLISH - 16
5.4 GRANITA PRODUCTION
5.4.1 “COFFEÈ” GRANITA (crushed-ice drink)
In this production cycle it is possible to set and
programme the processing time and not the
consistency value as for the ice-cream automatic
and semi-automatic production cycles.
- To switch to the GRANITA CAFFE’ function
mode, press the STOP and PRODUCTION
pushbuttons simultaneously. The SET led lights
up to signal that the GRANITA mode is now
active and the display visualises the last time
value (expressed in minutes) which has been set
manually.
- Press STOP (↓) and CLEANING (↑) pushbuttons to decrease or increase the
processing time for the production of granita. Once the required value has been set,
press DELIVERY (↔) to confirm the programme and start the cycle.
The maximum programmable time is 10 minutes.
- During this cycle the compressor keeps on working without interruptions, while the
agitator stops for 10 seconds and runs for half a second alternately. After the
programmed time has elapsed, the PRODUCTION pushbutton blinks and an
intermittent beep is released.
- Press the STOP pushbutton and deliver the product.
5.4.2 GRANITA “SICILIANA” (Sicilian-style
crushed-ice drink)
In this production cycle it is possible to set and
programme the consistency values, exactly as the
ice-cream semi-automatic production cycle.
- To switch to the GRANITA SICILIANA function
mode, press the STOP and SEMI-AUTOMATIC
pushbuttons simultaneously. The SET led lights
up to signal that the GRANITA mode is now
active and the display visualises the last
consistency value which has been set
manually.
- Press STOP (↓) and CLEANING (↑) pushbuttons to decrease or increase the required
consistency value (within a range between 120 and 180). After setting the required
value, press the DELIVERY pushbutton (↔) to confirm the programme and start the
cycle.
The recommended value ranges between 140 and 160.
- During this cycle the compressor and the agitator keep on working without
interruptions. Once the programmed consistency value has been reached, the SEMI-
AUTOMATIC pushbutton blinks and an intermittent beep is released.
- Press the STOP pushbutton and deliver the product.
To Next Page