Notes on using your unit
16 / 59
V-09 - 03/2017 - PM/Stme - English - © FRIMA
We do not accept any responsibility for any damage resulting from improper use or positioning
of the core temperature probe.
When the core temperature probe is not in use, put it back in the place provided on the cover
as shown - risk of damage.
Do not allow the core temperature probe to hang out of the pan – risk of damage.
Remove the core temperature probe from the food before you remove the food from the pan -
risk of damage.
If, at the beginning of a cooking process, the core temperature probe is hotter than the core
temperature set (e.g. because it was in the frying oil during preheating), allow it to cool before
putting it into food.
Please ensure that it is dry if it comes into contact with oil - risk of burning!
To Next Page
Loading...
