Before you call customer service
V-09 - 03/2017 - PM/Stme - English - © FRIMA
49 / 59
error possible cause Rectification
Water low: "Water tap
symbol"
Water tap closed Open the water tap
Water intake filter on
the unit is fouled
Check and clean the filter. To do this:
- Close the water tap and unscrew the
water supply line to the unit.
- Remove the filter at the water intake
and clean.
- Insert the filter once more. Connect
the water supply line and check for
leaks.
Water leaking out of
the bottom of the unit
The unit is not level Align the unit with a spirit level (see
installation instructions).
Drain is blocked
(blockages can occur
if a lot of products
containing a high
proportion of fat are
cooked or if the drain
pipe was fitted with an
insufficient fall).
Remove the drain (HT pipe) on the
bottom of the unit and clean. Run
the drain pipe as described in the
installation instructions.
To Next Page
Loading...
