Frima VarioCooking Center MULTIFICIENCY - Explanation of the Buttons

Operating instructions
V-09 - 03/2017 - PM/Stme - English - © FRIMA
21 / 59
Explanation of the buttons
Home button: Returns to the start
level (hold key down)
MyVCC unit configuration (model
112/112T/112L)
My VCC unit configuration
(model 112/112T/112L) shows
that a new software update is
available (Ethernet option). Press
the button and then select the
"system administration" button to
apply an update.
Pan selection button grey:
Switches to the display view
for the left-hand pan (model
112/112T/112L)
Pan selection button with red
border: A cooking process is
running in the left-hand pan
(display view for right-hand pan is
active). If action is required on the
left-hand side, the border flashes
(model 112/112T/112L).
Function button: Shows the
buttons for operating the unit
components such as cover,
pan, VarioDose, pan valve and
VitroCeran plate (optional, not
112T/112L)
Back button: Exits the process or
jumps to the higher level.
MyVCC unit configuration (model
211/311)
My VCC unit configuration (model
211, 311) shows that a new
software update is available
(Ethernet option only). Press
the button and then select the
"system administration" button to
apply an update.
Pan selection button red: Display
view the right-hand pan is active
(model 112/112T/112L)
Help function