Fritz! WLAN Repeater - Page 12

FRITZ!WLAN Repeater 310 12
Establishing a Connection Using WPS
3. Now press the “WLAN” button on the FRITZ!Box within
the next two minutes. Hold the “WLAN” button down un-
til the “WLAN” LED of the FRITZ!Box begins flashing. This
takes about 6 seconds.
The connection between the FRITZ!WLAN Repeater and the
FRITZ!Box has been established when the LEDs that display
the strength of the wireless radio signal stop flashing and re-
main lit.
WPS
Power
WLAN
Push for approx.
6 seconds
FestnetzFestnetz
InternetInternet
WLANWLAN
INFOINFO
Power/DSLPower/DSL
6 seconds