FRITZ!WLAN Repeater 310 28
Cannot Access Devices in the Network
4. On the “General” tab, enable the options “Obtain an IP
address automatically” and “Obtain DNS server address
automatically”.
5. Click “OK” to save the settings.
6. Only in Windows 7 and Windows Vista: Enable the op-
tions “Obtain an IPv6 address automatically” and “Ob-
tain DNS server address automatically” for the “Internet
Protocol Version 6 (TCP/IPv6)” as well.
Now the computer receives an IP address from the WLAN base
station.
To Next Page
Loading...
