EasyManua.ls Logo

Frizzlife MP99 - Install Faucet; Check for Leaks and Flush; FILTER REPLACEMENT INSTRUCTION; HOOK UP TO YOUR REFRIGERATOR

Frizzlife MP99
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FRIZZLIFE INC.
www.frizzlife.com
Page 5
Mount the faucet to your sink top
Connect the faucet with the 1/4" quick fitting
Connect the other end of 1/4" blue tube from
the "FILTERED" into the 1/4" fitting.
1
2
3
STEP 4 : INSTALL THE FAUCET
STEP 5 CHECK FOR LEAKS AND FLUSH THE FILTER
Turn on all the water supply and check
if there's any leaks on the connection
Flush the filter for 5 minutes before use
Leak check point 1
Leak check point 2
Leak check point 3
1
2
If the thickness of your counter is over 1.5 inch (3.8cm), please contact us
at support@frizzlife.com to claim for longer stem.
NOTE:
STEP 1: Twist the housing anti-clockwise;
STEP 2: Using wrench to unscrew the housing body;
STEP 3: Take out the old cartridge and load with new one, then install
back in the same way.
6. FILTER REPLACEMENT INSTRUCTION
PLEASE KEEP THE WRENCH ALWAYS !
WARNING
The MP99 under sink water filter system can
be connected with your refrigerator/Ice-maker by
utilizing an extra IMC-1 ice maker connection kit
(not included).
Simply search “Frizzlife IMC-1” or L55HN7R70B #nisA on Amazon
7.HOOK UP TO YOUR REFRIGERATOR
Model: MP99

Related product manuals