FROG Leap Twin - Step 2: Putting the System to Work; System Activation and Component Installation

11
9
0
-
D
A
Y
Replace cap and run FROG
Leap Twin Mineral Infuzer, with
FROG Leap Anti-Bac Mineral
Pac inserted, for 10 minutes on
Setting ON.
When chlorine reading is
down to 1.0 ppm, which may
take a few days, insert FROG
Leap Torpedo Pac into the
FROG Leap Twin Chlorine
Infuzer. (See page 17 for
directions.)
5.
6.
Install a FROG Leap Anti-
Bac Mineral Pac into the
FROG Leap Twin Mineral
Infuzer. (See page 14 for
directions.)
IMPORTANT:
Replace the FROG Leap
Anti-Bac Mineral Pac every
6 months or after one
pool season, whichever is
shorter. After that time, you
will hear the spent media
inside, however it is no
longer effective and must
be replaced.
FROG Leap Twin
Mineral Infuzer
FROG Leap Twin
Chlorine Infuzer
FROG Leap
Anti-Bac
Mineral Pac
FROG Leap Twin
Mineral Infuzer
FROG Leap
ALL-OUT
FROG Leap Twin
Chlorine Infuzer
FROG Leap Twin
Mineral Infuzer
FROG Leap Twin
Chlorine Infuzer
FROG Leap
Torpedo Pac
Step 2: Putting the System to Work
1.
2.
Insert FROG Leap ALL-OUT into
the open center of the FROG Leap
Anti-Bac Mineral Pac in FROG
Leap Twin Mineral Infuzer. (See
page 16 for directions.)
Use FROG Leap
ALL-OUT for a
90-day Algae
Protection
Guarantee!
3.
Shock the pool with FROG Leap
Depth Charge to rid the water
of contaminants. (See page 15
for FROG Leap Depth Charge
directions.)
Create a chlorine residual with
FROG Leap Reveille or a chlorine
shock. (See page 15 for FROG
Leap Reveille directions.)
4.
DANGER
If using standard chlorine shocks do not add in or near
the skimmer or into the FROG Leap Twin Infuzers as it
could damage equipment, risk potential explosion or
discolor your pool surface.
REVEILLE
Operate