17
Cut handle from FROG Leap Torpedo Pac using
a PVC cutting tool (KEEP OUT OF REACH OF
CHILDREN).
E. If openings are pinched
together, open with ngers or
re-cut closer to the colored
screens inside FROG Leap Tor-
pedo Pac. Leave at least 1/4”
of plastic to t into FROG Leap
Twin Chlorine Infuzer base.
®
2.
A. Find the indent in the
plastic.
B. Place curved section of tool
around the narrow end of one
pac tower and line up blade on
indent.
C. Squeeze the handles
together. Repeat for other
side
D. Make sure the blade comes
straight across on the indent
line for a clean cut.
Indent in plastic
A correct oval opening.
Avoid a pinched
opening.
®
Finished cut ends
FROG Leap Torpedo Pac is required to
assure up to 50% reduction in chlorine
use*. FROG Leap Torpedo Pac sold
separately. (EPA Reg. No. 53735-2)
Using
FROG Leap Torpedo Pac
1.
Turn off pump. Turn
control dial on FROG Leap
Twin Chlorine Infuzer to 0.
Remove cap from FROG
Leap Twin Chlorine Infuzer
and stand back to let any
chlorine fumes dissipate.
Continue...page 18
Using the FROG Leap Torpedo Pac
IMPORTANT: Read the label on the FROG
Leap Torpedo Pac carefully before using.
WARNING
Avoid sparks, smoking, or any open ame near
FROG Leap Twin Infuzers or chemicals.
DANGER
Never use fast dissolving chlorine tablets, liquid bleach,
or calcium hypochlorite in the FROG Leap Twin Infuzers.
Invert FROG Leap
Torpedo
Pac and shake slightly until
chlorine tablets fall into
tower areas.
3.
FROG Leap
Torpedo Pac
towers
FROG Leap
Torpedo Pac
towers
PVC cutting tool
available at local
hardware stores.
Operate
To Next Page
Loading...
