Fromm A480 - Compressed Air; Dimensions Without Suspension Bracket; Joint; Seals

5
a480man.en_teil1
5 TECHNICAL DATA
5.1 Dimensions without suspension bracket
5.2 Steel strap
5.3 Seals
5.4 Joint
Joint strength: approx. 55% of the strap’s tensile strength.
A single-notch (one pair of cut notches) is made per cycle.
5.5 Compressed air
Tool Packa ge
Length: 304 mm / 11.86" 440 mm / 17.16"
Width: 145 mm / 5.66" 253 mm / 9.87"
Height: 155 mm / 6.05" 170 mm / 6.63"
Weight: Net Gross
4.5 kg / 9.9 lbs 5 kg / 11 lbs
Width: 10 - 19 mm/ 3/8" - 3/4" (see chart of types)
Thickness: 0.3 8- 0.63 mm /.015 - .025" .
Quality: The A480 model allows the use of all current steel straps with tensile strengths
ranging from 87 000 to 160 000 psi (600 - 1100 N/mm
2
).
Straps with a low breaking elongation are not suitable for the A480 tool.
Strap width: Seal dimensions:
10 mm / 3/8" 10x22x0.6 / 3/8"x7/8"x0.024", with overlapping flanges
13 mm / 1/2 " 13x22x0.6 / 1/2"x7/8"x0.024", with overlapping flanges
16 mm / 5/8" 16x22x0.6 / 5/8"x7/8"x0.024", with overlapping flanges
19 mm/ 3/4" 19x22x0.6 / 3/4"x7/8"x0.024", with overlapping flanges
Joining thread: G 1/4"
Air tube: Min. inside diameter = 8 mm / 3/8"
Working pressure: 4.2 - 6 bar / 60 - 87 psi
Max. air pressure: 6 bar / 87 psi
Air consumption: Tensioning Sealing
450 Nl / 15.8 cu.ft. per minute 2.5 Nl / 0.09 cu.ft. per cycle