Fronius 63A-1 - Safety Rules; Safety Notice Explanations; General Safety Guidelines

(c) Fronius Australia Pty. Ltd, 2015 4/10
/ Consumption path
The meter in this scenario does not measure the solar production, only the consumption.
(Diagram 2)
1.3 Software update for Fronius Datamanager
The easiest way to update the Fronius Datamanager is to use the Datamanager’s web interface. To update
your software access the web interface follow the steps below:
/ Activate the Wi-Fi hotspot on the Datamanager card (inverter) or Datamanager Box V2
/ Connect your computer/tablet/smart phone to the Datamanager’s WLAN hotspot
/ Open a web browser and go to http://192.168.250.181 or http://datamanager/
Alternatively you can use Fronius SolarWeb App for tablet or smart phone and go to ‘Settings’ and click
‘PV Inverter Homepage’
/ Select Firmware update The Datamanager web interface (PV Inverter Homepage)
Go to ‘Firmware update’’
Grid
Fronius
Smart Meter
PV System
Loads
Loads
Site
main
switch