Fronius Smart Meter 63A-1 Series User Manual

(c) Fronius International GmbH, 2020 1/19
Quick Guide:
How to install a Fronius Smart Meter 63A-1 and
63A-3
*for 63A-1, 63A-3 whole current Fronius Smart Meters only. For the 50kA Fronius Smart Meter, the 240V/480V
Fronius Smart Meters UL or the Fronius Smart Meter TS refer to their respective guides.
Quick Guide
© Fronius International GmbH
Version 4.0/2020
Fronius reserves all rights, in particular rights of reproduction, distribution and translation.
No part of this work may be reproduced in any way without the written consent of Fronius. It must not be saved, edited,
reproduced or distributed using any electrical or electronic system.
You are hereby reminded that the information published in this document, despite exercising the greatest of care in its
preparation, is subject to change and that neither the author nor Fronius can accept any legal liability
Gender-specific wording refers equally to female and male form.

Fronius Smart Meter 63A-1 Series Specifications

General

Brand	Fronius
Model	Smart Meter 63A-1 Series
Category	Measuring Instruments
Language	English

Summary

1. GENERAL

1.1 Location of the Fronius Smart Meter

Explains the two possible installation points for the Fronius Smart Meter: feed-in point or consumption path.

2. INSTALLING AND ACTIVATING A FRONIUS SMART METER

2.1 Schematics and Wiring Requirements

Details the cable types, distances, and specific wiring requirements for connecting the meter to inverters.

2.2 Activating the Fronius Smart Meter on the SnapINverter

Guides through activating the meter using the SnapINverter's web interface via Wi-Fi or LAN.

2.3 Activating the Fronius Smart Meter on the GEN24 inverter

Provides instructions for activating the smart meter with the GEN24 inverter via its web interface.

3. FRONIUS SMART METER TROUBLESHOOTING

4.1 - Timeout, meter not detected

Offers troubleshooting steps for when the smart meter is not detected by the system after activation attempts.

4.2 - Data is not accurate in Solar.web

Provides solutions for common issues leading to inaccurate energy data displayed in Solar.web.