To Next PageTo Next Page
Need help?Do you have a question about the Fronius Smart Meter 50kA-3 and is the answer not in the manual?
General| Rated Current | 50 kA |
|---|---|
| Number of Phases | 3 |
| Operating Temperature Range | -25°C to +60°C |
| Nominal Voltage | 230/400 V |
| Accuracy Class | Class 1 |
| Mounting | DIN Rail |
| Protection Degree | IP20 |
| Measurement Category | CAT III |
| Rated Voltage | 230/400 V |
| Frequency Range | 50/60 Hz |
| Storage Temperature | -40°C to +70°C |
| Weight | 0.3 kg |
| Communication Interface | RS485, Modbus RTU |
| Measurement Accuracy (Active Energy) | ±1% |
Details the meaning of DANGER, WARNING, CAUTION, and NOTE safety symbols.
Outlines general rules for safe operation, personnel qualifications, and device handling.
Covers operating environmental conditions, copyright, and user responsibility for data protection.
Describes the Fronius Smart Meter's function, symbols, and installation location options.
Provides an installation checklist and details on the required protective circuit for the device.
Covers wiring, connection cross-sections, and selection criteria for current transformers.
Explains the use of terminating resistors and how to set transformation ratios for accurate measurement.
Details multi-meter system concepts, symbols, and Modbus participants for device networking.
Instructions for configuring the Modbus address for the Fronius Smart Meter.
Guide to connecting and configuring the Smart Meter with Fronius SnapINverter systems.
Guide to connecting and configuring the Smart Meter with Fronius GEN24 inverters.
Comprehensive technical data, operating conditions, and performance metrics of the Fronius Smart Meter.
Details on warranty terms and registration for the Fronius Smart Meter.
