Fronius Smart Meter 50kA-3 - Setting the Transformation Ratio of the Current and Voltage Transformers on the Fronius Smart Meter

* The terminating resistor on Fronius Smart Meters is installed between 33 and 34. The
terminating resistor R 120 Ohm is included with the Fronius Smart Meter.
Setting the trans-
formation ratio of
the current and
voltage trans-
formers on the
Fronius Smart
Meter
Only the transformation ratio of the current and voltage transformers must be set. All
other parameters have already been set in advance.
Password (0001):
+
Transformation ratio of the current transformers
1)
(0001 - 9999
2)
):
+
1)
Transformation ratio of the voltage transformers
1), 3)
(001.0 - 500.0
2)
):
15
EN