Fronius CU 800i - Page 37

2
2
3
1
3
Use the screws supplied with the cooling
unit to secure the power source to the
cooling unit.
Only if the cooling unit has the OPT/i CU Torch deflate option:
*
**
***
max. 20 l/min (5.28 gal./min [US])
max. 4 bar (58.02 psi)
* Gas hose from the scope of delivery of the cooling unit (gas hose is only supplied
if the OPT/i CU Torch deflate option is installed in the cooling unit)
** For gas supply
*** Maximum 20 l/min (5.28 gal./min) gas flow at gas pressure regulator/maximum
4 bar (58.02 psi)
4
37
EN