Fronius Eco - Basic Menu Settings Configuration

Access Code
The second digit flashes.
5
Repeat steps 3 and 4 for the second,
third, fourth and fifth digits of the access
code until...
the selected code starts flashing.
6
Press the "Enter" button
The Basic menu appears.
7
Use the "Plus" and "Minus" keys to select the desired entry
8
Edit the desired menu item by pressing the "Enter" button
9
Press the "Esc" key to exit the Basic menu
Settings in the
Basic menu
1
3
2
2
1
1
2
1 1
2
3
Mode of operation
Trigger response
Connection type
Warning is shown on the display
(STATE 568).
Inverter is switched off (STATE
668).
Mode of operation
Trigger response
Connection type
N/C (normally closed contact) *
N/O (normally open contact) *
58