To Next PageTo Next Page
Need help?Do you have a question about the Fronius Primo and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| AC nominal output | 3.0 - 8.2 kW |
| Grid frequency | 50 Hz / 60 Hz |
| THD | < 3 % |
| Power factor (cos φac,r) | 0.85 - 1 ind./cap. |
| Efficiency | 98% |
| Max. input voltage | 1000 V |
| MPP voltage range | 240 - 800 V |
| Number of DC connections | 2 |
| Number of MPP Trackers | 1 |
| Dimensions (H x W x D) | 645 x 431 x 204 mm |
| Weight | 21.5 kg |
| Protection class | IP65 |
| Operating temperature range | -40 °C to +60 °C |
| Warranty | 5 years |
| Model | Primo |
| AC nominal voltage | 230 V |
Explains DANGER, WARNING, CAUTION, NOTE, IMPORTANT symbols for safety.
Defines intended use, limitations, and user responsibilities for the inverter.
Details grounding, AC cable looping, neutral conductor requirements, and cable routing.
Specifies fuse ratings for different models and discusses RCD requirements for frequency converters.
Advises on selecting solar modules and observing temperature coefficients and safety instructions.
States the inverter is for ungrounded solar modules and advises checking polarity and voltage.
Advises switching off the DC main switch before attaching and ensuring correct tightening of screws.
Details the process of updating inverter software using a USB stick via the setup menu.
Advises checking screw joints annually for outdoor horizontal installations and that service is by trained technicians.
