Fronius Primo User Manual

19
EN
Notes regarding the laying of data communication
cables
Laying data com-
munication ca-
bles
IMPORTANT! Operating the inverter with
one option card and two broken-out option
card slots is not permitted.
To cater for this eventuality, a suitable blan-
king cover (42,0405,2020) is available from
Fronius as an option.
IMPORTANT! Note the following if data communication cables are being introduced into
the inverter:
- depending on the number and cross-section of the data communication cables that
are being introduced, take the relevant blanking plugs out of the sealing insert and in-
sert the data communication cables.
- the relevant blanking plugs must be inserted into the free openings on the sealing in-
sert.

Fronius Primo Specifications

General

Category	Inverter
AC nominal output	3.0 - 8.2 kW
Grid frequency	50 Hz / 60 Hz
THD	< 3 %
Power factor (cos φac,r)	0.85 - 1 ind./cap.
Efficiency	98%
Max. input voltage	1000 V
MPP voltage range	240 - 800 V
Number of DC connections	2
Number of MPP Trackers	1
Dimensions (H x W x D)	645 x 431 x 204 mm
Weight	21.5 kg
Protection class	IP65
Operating temperature range	-40 °C to +60 °C
Warranty	5 years
Model	Primo
AC nominal voltage	230 V