Need help?Do you have a question about the Fronius Primo GEN24 3.0 and is the answer not in the manual?
General| Max. apparent AC power | 3.0 kVA |
|---|---|
| Max. output current (at AC nom. voltage) | 13.0 A |
| AC voltage range | 180 - 280 V |
| Frequency | 50 / 60 Hz |
| THD | < 3 % |
| Max. input current (DC) | 12.5 A |
| Max. input current per MPP tracker | 12.5 A |
| Protection class | IP66 |
| AC Nominal Power | 3.0 kW |
| Operating Temperature Range | -25 - 60 °C |
| Warranty | 10 years |
Explains warning symbols, safety standards, and personnel qualifications.
Details environmental conditions, qualified personnel, and EMC considerations.
Covers backup power function, data protection, and copyright information.
Explains the importance and requirements for protective earthing connections.
Describes the inverter's basic function, device concept, and feature overview.
Details the scope of supply, Fronius UP expansion, and intended use of the inverter.
Explains the inverter's cooling concept and the use of Fronius Solar.web.
Defines symbols used to illustrate different operating modes of the system.
Illustrates system configurations with inverter and battery in various modes.
Shows system setups involving multiple inverters and battery configurations.
Details energy flow directions and battery system operating states.
Explains conditions for entering/exiting energy saving mode and its indication.
Lists compatible batteries and operational limitations, including BYD Battery-Box.
Describes integrated protection features like grid/system protection, WSD, RCMU, and surge protection.
Details the inverter's connection area, terminals, divider, and ground electrode terminal.
Explains DC disconnector, data communication interfaces, and I/O terminals.
Details the PV Point backup power variant, its capabilities, and limitations.
Covers prerequisites, transition procedures, and energy saving modes for Full Backup.
Describes cabling for backup power with 1-pin separation, including transition procedures.
Explains 2-pin separation cabling variants and transition procedures for backup power.
Details 2-pin separation cabling for Italy, including transition procedures for backup power.
Guides on selecting installation location, mounting bracket, and warnings.
Step-by-step instructions for installing the mounting bracket and attaching the inverter.
Specifies allowed cable types, cross-sections, and fuse protection requirements for connections.
Provides safety and procedural information for connecting the inverter to the public grid.
Details safety and connection steps for solar module strings to the inverter.
Guides on safely connecting the battery to the inverter on the DC side.
Covers safety, installation, and connection steps for the PV Point backup power.
Details safety, cabling variants, and testing for Full Backup power.
Explains Modbus participants, cable routing, and data communication connections.
Covers battery communication, terminating resistors, and WSD installation.
Instructions for closing the inverter housing and setting the DC disconnector.
Guides on initial startup, LED indicators, and configuration via app or web browser.
Covers user login and language selection within the inverter's interface.
Details configuring PV generator, battery, meters, I/Os, and Demand Response Modes.
Explains energy management settings for self-consumption optimization and load management.
Covers system name, time synchronization, updates, and setup wizards.
Details factory reset, event logs, archived events, and license management.
Outlines procedures for activating support users and enabling remote maintenance.
Guides on establishing network connections via LAN and WLAN.
Explains Modbus RTU and TCP settings, inverter control, and Fronius Solar API.
Details country-specific settings, feed-in limitations, and dynamic power regulation.
Covers installation and de-energizing procedures for surge protective devices.
Provides guidance on cleaning, maintenance, safety, operation in dusty environments, disposal, and packaging.
Outlines warranty information and components for backup power changeover.
Lists status codes, their causes, remedies, and associated warnings.
Provides detailed electrical and operational specifications for GEN24 3.0/3.0 Plus models.
Lists detailed electrical and operational specifications for GEN24 3.6/3.6 Plus models.
Provides detailed electrical and operational specifications for GEN24 4.0/4.0 Plus models.
Lists detailed electrical and operational specifications for GEN24 4.6/4.6 Plus models.
Provides detailed electrical and operational specifications for GEN24 5.0/5.0 Plus models.
Lists detailed electrical and operational specifications for GEN24 6.0/6.0 Plus models.
Details technical specifications for surge protective devices and integrated DC disconnectors.
Illustrates the circuit diagram for the PV Point backup power configuration.
Shows circuit diagrams for GEN24 with BYD Battery-Box HV configurations.
Provides circuit diagrams for various automatic backup power switching variants.
Illustrates wiring diagrams for Enwitec Box integration and surge protective devices.
Displays the physical dimensions and mounting details for GEN24 3-6 kW models.
To Next Page