Fronius Primo - Explanation of Symbols - Installation Position

7
EN
Explanation of
symbols - instal-
lation position
The inverter is designed to be installed vertically on a vertical wall or pil-
lar.
The inverter is suitable for horizontal installation.
The inverter is suitable for installation on a sloping surface.
Do not install the inverter on a sloping surface with its connection sockets
facing upwards.
Do not install the inverter at an angle on a vertical wall or pillar.
Do not install the inverter horizontally on a vertical wall or pillar.
Do not install the inverter on a vertical wall or pillar with its connection
sockets facing upwards.
Do not install the inverter such that it overhangs with its connection sock-
ets facing upwards.